Quick Specifications
| Model | JK-BD6A24S10P |
|---|---|
| Dimensions | 162 x 102 x 20 mm |
| Material | Aluminum Alloy Heat Sink & PCB |
| Balance | 0.6A Active Equalization |
| Cont. Current | 100A |
| Peak Current | 200A |
| Strings | 7S~24S (Li-ion) / 8S~24S (LiFePO4) / 12S~24S (LTO) |
| Accessories | Sampling wires, Built-in Bluetooth, 3x NTC Temperature sensors |
| Application Scenarios | Solar power stations, base station backup power, high-power storage |
Quick Specifications
| Model | JK-BD6A24S10P |
|---|---|
| Dimensions | 162 x 102 x 20 mm |
| Material | Aluminum Alloy Heat Sink & PCB |
| Balance | 0.6A Active Equalization |
| Cont. Current | 100A |
| Peak Current | 250A |
| Strings | 7S~24S (Li-ion) / 8S~24S (LiFePO4) / 12S~24S (LTO) |
| Accessories | Sampling wires, Built-in Bluetooth, 3x NTC Temperature sensors |
| Application Scenarios | Solar power stations, base station backup power, high-power storage |
Product Overview
The JK-BD6A24S10P is a 100A smart BMS with 0.6A active balancing, designed for mid-to-large lithium battery packs from 7S to 24S. It supports Li-ion (7S~24S), LiFePO4 (8S~24S), and LTO (12S~24S) on a single board, giving pack builders one SKU for a wide range of system voltages.
Active balancing moves charge between cells instead of burning it off as heat, so the pack stays balanced through every cycle with less thermal stress. Combined with 200A peak discharge, ±3mV measurement accuracy, and a complete protection set, this BMS is a solid fit for solar storage, shared mobility batteries, and base station backup.
Choosing between 16S and 24S? See our 16S/24S LiFePO4 selection guide.
Core Features
- 0.6A Active Balancing: Energy-transfer balancing keeps cells equalized without heat waste, improving pack capacity and cycle life.
- 100A Continuous / 200A Peak Output: Low 1mΩ MOSFET resistance delivers efficient, high-power discharge for demanding loads.
- Wide Chemistry Compatibility: Li-ion 7S~24S, LiFePO4 8S-24S, LTO 12S~24S on one board; 20~100V working voltage.
- ±3mV Voltage Accuracy: High-precision cell monitoring with a built-in coulomb counter for accurate SOC tracking.
- Full Protection Suite: Overcharge, over-discharge, adjustable overcurrent (10A-100A adjustable), overtemperature, and short-circuit protection; same-port charge/discharge.
- Bluetooth App + Optional GPS: Monitor and configure via Android/iOS app; GPS remote control and RS485/CAN available for fleet and telecom use.
Application Scenarios
Built for systems that work hard every day, the JK-BD6A24S10P fits Solar power stations, base station backup power, high-power storage.
See how JKBMS compares with alternatives in our JK BMS vs. Daly BMS comparison.
Frequently Asked Questions
Which battery packs is the JK-BD6A24S10P compatible with?
The JK-BD6A24S10P supports 7S~24S (Li-ion) / 8S~24S (LiFePO4) / 12S~24S (LTO) lithium battery packs — covering Li-ion, LiFePO4 and LTO chemistries (see the specification table above for the exact range per chemistry). It delivers 100A continuous discharge current, making it a solid choice for solar energy storage, RV power systems and industrial backup power.
How does the 0.6A active balancing on the JK-BD6A24S10P work?
Instead of burning excess charge off as heat like a passive balancer, the JK-BD6A24S10P transfers energy from higher-voltage cells to lower-voltage cells at up to 0.6A. This keeps every cell at a uniform voltage, extends overall pack life and greatly reduces heat during charging.
Can I monitor the JK-BD6A24S10P from my phone?
Yes. The JK-BD6A24S10P has built-in Bluetooth and connects to the JK BMS smartphone app, where you can check individual cell voltages, pack current, temperature readings and state of charge in real time. An optional GPS module adds remote location tracking for deployed systems.
Do you offer wholesale pricing or custom versions of the JK-BD6A24S10P?
Yes. JKBMS supplies the JK-BD6A24S10P to battery pack assemblers, distributors and brands worldwide. Click Request a Quote above for wholesale pricing, OEM/ODM customization options and lead times.